HOME / PRODUCTS / CITEL / TELECOM / DLA-06D3
CITEL PRODUCTS
1-PAIR DIN RAIL PLUG-IN DATA SURGE PROTECTOR
DLA-06D3
- Pluggable surge protection for <<DIN>> mounting
- Coordination inductor
- Up to 2.4 A line current
- Remote supply version
- All types of Telephone and Data lines
- Shield wire protection
- IEC 61643-21 compliance
Discription
Electrical Properties
Mechinical Properties
Discription
DLAH surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines. These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines: line voltage from 6 to 170V, bitrate up to 10 Mbit/s. These products are 1-pair surge protectors with removable module for easy maintenance.
Electrical Properties
Network | RS422, RS485 | |
Nominal line voltage | Un | 6 V |
Max. DC operating voltage | Uc | 8 Vdc |
Max. frequency | f max. | > 3 MHz |
Insertion loss | < 1 dB | |
Max. load current | IL | 2.4 A |
Max. discharge current max. withstand @ 8/20 µs by pole | Imax | 20 kA |
Line inductance | 10uH | |
Protection level Following the test category C3 (IEC61643-21) – Line/Line | Up | 20 V |
Protection level Following the test category C3 (IEC61643-21) – Line/PE | Up | 20 V |
Impulse current 2 x 10/350µs Test – D1 Category | Iimp | 5 kA |
Line/Line Nominal discharge current C2 Category | In L/L | 5 kA |
Line/Ground Nominal discharge current 8/20µs Test x 10 – C2 Category | In L/PE | 5 kA |
Line resistance | 0 Ohm |
Mechinical Properties
Network type | Data Communication | |
Technology | GDT+Clamping diode | |
SPD configuration | 1-pair+shielded | |
Connection to Network | By screw terminal: cross section 0.4-1.5mm² | |
Format | Plug-in DIN box | |
Mounting | Symmetrical rail 35 mm (EN 60715) | |
Housing material | Thermoplastic UL94 V-0 | |
Operating temperature | Tu | -40/+85°C |
Protection rating | IP20 | |
Failsafe mode | Short-circuit | |
Disconnection indicator | Transmission interrupt – default mode 2 | |
Spare module(s) | DLAHM-06D3 |